Unveiling Syndesmotic Malreduction: A Proof-of-Concept towards Portable Ultrasound Detection.

Objectives: To evaluate the utility and diagnostic performance of portable handheld ultrasound for evaluating fibular rotation at the distal tibiofibular articulation after syndesmotic disruption. Methods: Four above-the-knee cadaveric specimens were included. Syndesmotic disruption was precipitated by transecting the Anterior Inferior Tibiofibular Ligament, Interosseous Ligament, and Posterior Inferior Tibiofibular Ligament. Thereafter, a proximal fibular osteotomy was performed, and three conditions were modeled at the distal syndesmosis: 1) reduced, 2) 5 degree internal rotation malreduction, and 3) 5 degree external rotation malreduction. Two blinded observers performed separate ultrasonographic examinations for each condition at the level of both the anterior and posterior distal tibiofibular articular surfaces. Syndesmotic gap penetrance, defined as the ability of the P-US to generate signal between the distal fibula and tibia at the level of the incisura, was graded positive if the sonographic waves penetrated between the distal tibiofibular joint and negative if no penetrating waves were detected. The accuracy measures of the anterior and posterior gap penetrance were evaluated individually. Results: Our preliminary results showed that posterior gap penetrance showed good performance when detecting either internal or external rotational malreduction of the fibula with very good specificity (87.5%) and PPV (90.0%). On the other hand, the anterior gap penetrance showed limited performance when detecting either form of rotational malreduction. Conclusion: We introduced a novel sign, the "gap penetrance sign", best measured from the posterior ankle, which can accurately detect syndesmotic malreduction using P-US in a manner that does not require specific quantitative measurements and is readily accessible to early P-US users.

The Influence of Talar Displacement on Articular Contact Mechanics: A 3D Finite Element Analysis Study Using Weightbearing Computed Tomography.

BACKGROUND: Talar displacement is considered the main predictive factor for poor outcomes and the development of post-traumatic osteoarthritis after ankle fractures. Isolated lateral talar translation, as previously studied by Ramsey and Hamilton using carbon powder imprinting, does not fully replicate the multidirectional joint subluxations seen in ankle fractures. The purpose of this study was to analyze the influence of multiple uniplanar talar displacements on tibiotalar contact mechanics utilizing weightbearing computed tomography (WBCT) and finite element analysis (FEA). METHODS: Nineteen subjects (mean age = 37.6 years) with no history of ankle surgery or injury having undergone WBCT arthrogram (n = 1) and WBCT without arthrogram (n = 18) were included. Segmentation of the WBCT images into 3D simulated models of bone and cartilage was performed. Three-dimensional (3D) multiple uniplanar talar displacements were simulated to investigate the respective influence of various uniaxial displacements (including lateral translation, anteroposterior translation, varus-valgus angulation, and external rotation) on the tibiotalar contact mechanics using FEA. Tibiotalar peak contact stress and contact area were modeled for each displacement and its gradations. RESULTS: Our modeling demonstrated that peak contact stress of the talus and tibia increased, whereas contact area decreased, with incremental displacement in all tested directions. Contact stress maps of the talus and tibia were computed for each displacement demonstrating unique patterns of pressure derangement. One millimeter of lateral translation resulted in 14% increase of peak talar contact pressure and a 3% decrease in contact area. CONCLUSION: Our model predicted that with lateral talar translation, there is less noticeable change in tibiotalar contact area compared with prior studies whereas external rotation greater than 12 degrees had the largest effect on peak contact stress predictions. LEVEL OF EVIDENCE: Level V, computational simulation study.

Effect of sequential burr passes on minimally invasive akin and first metatarsal dorsiflexion osteotomies.

BACKGROUND: Minimally invasive surgical (MIS) osteotomies are increasing as a surgical option for treating midfoot and forefoot conditions. This study aimed to evaluate the impact of each burr pass on the degree of correction, gap size, and alignment in MIS Akin and first metatarsal dorsiflexion osteotomies (DFO). METHODS: MIS Akin and first metatarsal DFO were performed on ten cadaveric specimens. Fluoroscopic measurements included the metatarsal dorsiflexion angle (MDA), dorsal cortical length (MDCL), first phalangeal medial cortical length (PCML) and proximal to distal phalangeal articular angle (PDPAA). RESULTS: The average decrease in PCML with each burr pass was as follows: 1.53, 1.33, 1.27, 1.23 and 1.13 mm at the 1st to 5th pass, respectively. The MDCL sequentially decreased by 1.80, 1.59, 1.35, 0.75, and 0.60 mm. The MDA consistently decreased, and the PDPAA incrementally became more valgus oriented. CONCLUSION: On average, a first metatarsal dorsal wedge resection of 4.7 mm and first phalangeal medial wedge resection of 2.9 mm was achieved after 3 and 2 burr passes, respectively. This data may aid surgeons determine the optimal number of burr passes required to achieve the desired patient-specific surgical correction.

Medializing Calcaneal Osteotomy for progressive collapsing foot deformity alters the three-dimensional subtalar joint alignment.

BACKGROUND: A medializing calcaneal osteotomy (MCO) is considered as one of the key inframalleolar osteotomies to correct progressive collapsing foot deformity (PCFD). While many studies were able to determine the post-operative hind- and midfoot alignment, alternations of the subtalar joint alignment remained obscured by superposition on plain radiography. Therefore, we aimed to assess the hind-, midfoot- and subtalar joint alignment pre- compared to post-operatively using 3D weightbearing CT (WBCT) imaging. METHODS: Seventeen patients with a mean age of 42 ± 17 years were retrospectively analyzed. Inclusion criteria consisted of PCFD deformity corrected by a medializing calcaneal osteotomy (MCO) as main procedure and imaged by WBCT before and after surgery. Exclusion criteria were patients who had concomitant calcaneal lengthening osteotomies, mid-/hindfoot fusions, hindfoot coalitions, and supramalleolar procedures. Image data were used to generate 3D models and compute the hindfoot (HA), midfoot (MA) - and subtalar joint (STJ) alignment in the coronal, sagittal and axial plane, as well as distance maps. RESULTS: Pre-operative measurements of the HA and MA improved significantly relative to their post-operative equivalents p < 0.05). The post-operative STJ alignment showed significant inversion (2.8° ± 1.7), abduction (1.5° ± 1.8), and dorsiflexion (2.3° ± 1.7) of the talus relative to the calcaneus (p < 0.05) compared to the pre-operative alignment. The displacement between the talus and calcaneus relative to the sinus tarsi increased significantly (0.6 mm±0.5; p < 0.05). CONCLUSION: This study detected significant changes in the sagittal, coronal, and axial plane alignment of the subtalar joint, which corresponded to a decompression of the sinus tarsi. These findings contribute to our clinical practice by demonstrating the magnitude of alteration in the subtalar joint alignment that can be expected after PCFD correction with MCO as main procedure.

Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy.

PURPOSE: This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy. METHODS: MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle. RESULTS: The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters. CONCLUSION: The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.

Diagnostic applications and benefits of weightbearing CT in the foot and ankle: A systematic review of clinical studies.

BACKGROUND: Foot and ankle weightbearing CT (WBCT) imaging has emerged over the past decade. However, a systematic review of diagnostic applications has not been conducted so far. METHOD: A systematic literature search was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines after Prospective Register of Systematic Reviews (PROSPERO) registration. Studies analyzing diagnostic applications of WBCT were included. Main exclusion criteria were: cadaveric specimens and simulated WBCT. The Methodological Index for Non-Randomized Studies (MINORS) was used for quality assessment. RESULTS: A total of 78 studies were eligible for review. Diagnostic applications were identified in following anatomical area's: ankle (n = 14); hindfoot (n = 41); midfoot (n = 4); forefoot (n = 19). Diagnostic applications that could not be used on weightbearing radiographs (WBRX) were reported in 56/78 studies. The mean MINORS was 9.8/24 (range: 8-12). CONCLUSION: Diagnostic applications of WBCT were most frequent in the hindfoot, but other areas are on the rise. Post-processing of images was the main benefit compared to WBRX based on a moderate quality of the identified studies.

Comparison between achilles tendon reinsertion and dorsal closing wedge calcaneal osteotomy for the treatment of insertional achilles tendinopathy: A meta-analysis.

BACKGROUND: The debridement and Achilles tendon reinsertion (DATR) have been the most common surgical approach for the treatment of Insertional Achilles Tendinopathy (IAT), while dorsal closing wedge calcaneal osteotomy (DCWCO) has recently gained popularity as an alternative surgical option. This study aimed to systematically review the published literature on both surgical techniques and compare their clinical outcomes and complication rates. METHODS: A systematic review was performed according to the PRISMA guidelines using Medline, Embase, and Scopus databases. The inclusion criteria encompassed clinical studies reporting functional outcomes and complications, with a minimum of 10 patients and at least 12 months of follow-up. RESULTS: Seven studies (n = 169) were included for the analysis of DATR, and eight studies (n = 227) were included for the analysis of open DCWCO. Both groups showed a similar improvement in AOFAS score. The overall complication rates were 16.6% in the DATR group and 9.2% in the DCWCO group, but the difference was not statistically significant. However, there was a significantly higher incidence of wound complications in the DATR group (10.1%, 95% C.I.: 4.7-15.6) compared to the DCWCO group (2.5%, 95% C.I.: 0.6-4.4) as the confidence intervals did not overlap. CONCLUSIONS: Clinical outcomes and overall complication rates of both techniques were comparable, although DCWCO had a lower incidence of wound complications. Further research should be focused on prospective studies comparing the two techniques to corroborate the current findings. LEVEL OF EVIDENCE: Level IV; meta-analysis.

Implementing automated 3D measurements to quantify reference values and side-to-side differences in the ankle syndesmosis.

Detection of syndesmotic ankle instability remains challenging in clinical practice due to the limitations of two-dimensional (2D) measurements. The transition to automated three-dimensional (3D) measurement techniques is on the verge of a breakthrough but normative and side-to-side comparative data are missing. Therefore, our study aim was two-fold: (1) to establish 3D anatomical reference values of the ankle syndesmosis based on automated measurements and (2) to determine to what extent the ankle syndesmosis is symmetric across all 3D measurements. Patients without syndesmotic pathology with a non-weight-bearing CT scan (NWBCT; N = 38; Age = 51.6 ± 17.43 years) and weight-bearing CT scan (WBCT; N = 43; Age = 48.9 ± 14.3 years) were retrospectively included. After training and validation of a neural network to automate the segmentation of 3D ankle models, an iterative closest point registration was performed to superimpose the left on the right ankle. Subsequently, 3D measurements were manually and automatically computed using a custom-made algorithm and side-to-side comparison of these landmarks allowed one to investigate symmetry. Intra-observer analysis showed excellent agreements for all manual measurements (ICC range 0.85-0.99) and good (i.e. < 2.7° for the angles and < 0.5 mm for the distances) accuracy was found between the automated and manual measurements. A mean Dice coefficient of 0.99 was found for the automated segmentation framework. The established mean, standard deviation and range were provided for each 3D measurement. From these data, reference values were derived to differ physiological from pathological syndesmotic alignment. Furthermore, side-to-side symmetry was revealed when comparing left to right measurements (P > 0.05). In clinical practice, our novel algorithm could surmount the current limitations of manual 2D measurements and distinguish patients with a syndesmotic ankle lesion from normal variance.

Statistical shape model-based tibiofibular assessment of syndesmotic ankle lesions using weight-bearing CT.

Forced external rotation is hypothesized as the key mechanism of syndesmotic ankle injuries, inducing a three-dimensional deviation from the normal distal tibiofibular joint (DTFJ) alignment. However, current diagnostic imaging modalities are impeded by a two-dimensional assessment, without considering ligamentous stabilizers. Therefore, our aim is threefold: (1) to construct an articulated statistical shape model of the normal DTFJ with the inclusion of ligamentous morphometry, (2) to investigate the effect of weight-bearing on the DTFJ alignment, and (3) to detect differences in predicted syndesmotic ligament length of patients with syndesmotic lesions with respect to normative data. Training data comprised non-weight-bearing CT scans from asymptomatic controls (N = 76), weight-bearing CT scans from patients with syndesmotic ankle injury (N = 13), and their weight-bearing healthy contralateral side (N = 13). Path and length of the syndesmotic ligaments were predicted using a discrete element model, wrapped around bony contours. Statistical shape model evaluation was based on accuracy, generalization, and compactness. The predicted ligament length in patients with syndesmotic lesions was compared with healthy controls. With respect to the first aim, our presented skeletal shape model described the training data with an accuracy of 0.23 ± 0.028 mm. Mean prediction accuracy of ligament insertions was 0.53 ± 0.12 mm. In accordance with the second aim, our results showed an increased tibiofibular diastasis in healthy ankles after weight-bearing. Concerning our third aim, a statistically significant difference in anterior syndesmotic ligament length was found between ankles with syndesmotic lesions and healthy controls (p = 0.017). There was a significant correlation between the presence of syndesmotic injury and the positional alignment between the distal tibia and fibula (r = 0.873, p < 0,001). Clinical Significance: Statistical shape modeling combined with patient-specific ligament wrapping techniques can facilitate the diagnostic workup of syndesmosic ankle lesions under weight-bearing conditions. In doing so, an increased anterior tibiofibular distance was detected, corresponding to an "anterior open-book injury" of the ankle syndesmosis as a result of anterior inferior tibiofibular ligament elongation/rupture.

Morphometric analysis of the incisura fibularis in patients with unstable high ankle sprains.

OBJECTIVE: The role of the syndesmotic ankle ligaments as extrinsic stabilizers of the distal tibiofibular joint (DTFJ) has been studied extensively in patients with high ankle sprains (HAS). However, research concerning the fibular incisura as intrinsic stabilizer of the DTFJ has been obscured by a two-dimensional assessment of a three-dimensional structure. Therefore, we aimed to compare the morphometry of the incisura fibularis between patients with HAS and a control group using three-dimensional radiographic techniques. MATERIALS AND METHODS: Fifteen patients with a mean age of 44 years (SD = 15.2) diagnosed with an unstable HAS and twenty-five control subjects with a mean age of 47.4 years (SD = 6.5) were analyzed in this retrospective comparative study. The obtained CT images were converted to three-dimensional models, and the following radiographic parameters of the incisura fibularis were determined using three-dimensional measurements: incisura width, incisura depth, incisura height, incisura angle, incisura width-depth ratio, and incisura-tibia ratio. RESULTS: The mean incisura depth (M = 4.7 mm, SD = 1.1 mm), incisura height (M = 36.1 mm, SD = 5.3 mm), and incisura angle of the control group (M = 137.2°, SD = 7.9°) differed significantly from patients with a HAS (resp., M = 3.8 mm, SD = 1.1 mm; M = 31.9 mm, SD = 3.2 mm; M = 143.2°, SD = 8.3°) (P < 0.05). The incisura width, incisura width-depth ratio, and incisura-tibia ratio demonstrated no significant difference (P > 0.05). CONCLUSION: Our three-dimensional comparative analysis has detected a shallower and shorter fibular incisura in patients with HAS. This distinct morphology could have repercussion on the intrinsic or osseous stability of the DTFJ. Future prospective radiographic assessment could determine to what extend the fibular incisura morphology contributes to syndesmotic ankle injuries caused by high ankle sprains.

The hind- and midfoot alignment computed after a medializing calcaneal osteotomy using a 3D weightbearing CT.

PURPOSE: A medializing calcaneal osteotomy (MCO) is a surgical procedure frequently performed to correct an adult acquired flatfoot (AAFD) deformity. However, most studies are limited to a 2D analysis of 3D deformity. Therefore, the aim is to perform a 3D assessment of the hind- and midfoot alignment using a weightbearing CT (WBCT) preoperatively as well as postoperatively. METHODS: Eighteen patients with a mean age of 49.4 years (range 18-67) were prospectively included in a pre-post-study design. A MCO was performed and a WBCT was obtained pre- and postoperative. Images were converted into 3D models to compute linear and angular measurements, respectively, in millimeters (mm) and degrees (°), based on previously reported landmarks of the hind- and midfoot alignment. A regression analysis was performed between the displacement of a MCO and the obtained postoperative correction. RESULTS: The mean 3D hindfoot angle improved significantly preoperative compared to postoperative (p < 0.001). This appeared according to a linear relation with the amount of medial translation in a MCO (R2 = 0.84, p < 0.001). The axes of the tibia showed significant coronal as well as axial changes (p < 0.05). Analysis of the midfoot showed significant changes in the navicular height and rotation as well as the Méary angle (p < 0.05). Additionally, a linear trend between the midfoot measurements and amount of medial translation in a MCO was observed, but not significant (p > 0.05). CONCLUSION: This study demonstrates an effective 3D correction of an AAFD by a MCO according to a linear relationship. The concomitant formula can be used to perform a preoperative planning. The novelty is the comparative 3D weightbearing CT assessment of both the computed hind- and midfoot alignment after a medializing calcaneus osteotomy. This could improve accuracy of the currently performed preoperative planning in clinical practice.